Pidign: 2.7.0 & SIPE Plug-in 1.10

Bill MacAllister whm at stanford.edu
Thu May 13 11:40:37 EDT 2010


David,

If you had read all the way to the end of the message you received
you would have found:
  _______________________________________________
  Support at pidgin.im mailing list
  Want to unsubscribe?  Use this link:
  http://pidgin.im/cgi-bin/mailman/listinfo/support

In general, you do not unsubscribe to a list by sending a message to
the list.  That just tends to irritate everyone on the list.  It
certainly irritated me, and I have had to work hard at suppressing
several snide comments about Oracle.

Bill

--On Thursday, May 13, 2010 03:30:41 PM +0000 david.griffith at oracle.com wrote:

>
> Please take off all Support distributions .
>
> Sent from my BlackBerry® wireless device
>
> -----Original Message-----
> From: Pento Robert-QA4508 <Rob.Pento at motorola.com>
> Date: Thu, 13 May 2010 10:29:32
> To: Daniel Atallah<datallah at pidgin.im>
> Cc: support at pidgin.im<support at pidgin.im>
> Subject: RE: Pidign: 2.7.0 & SIPE Plug-in 1.10
>
> My sets were as follows:
>
> 1) Install Pidgin 2.7.0
> 2) Uninstall SIPE
> 3) Reinstall SIPE 1.10
> 4) reboot PC
>
> I don't see "Office Communicator" as a valid Account type.
>
>
> Rob Pento
> H&NM - LTE eNodeB System Design
> Desk: 847-632-3395
> Cell: 847-757-3124
>
> The bitterness of poor quality lingers long after the sweetness of meeting a schedule is forgotten.
> - Director of Submarine Safety & QA, Naval Sea Sys Command
>
> -----Original Message-----
> From: daniel.atallah at gmail.com [mailto:daniel.atallah at gmail.com] On Behalf Of Daniel Atallah
> Sent: Thursday, May 13, 2010 9:25 AM
> To: Pento Robert-QA4508
> Cc: support at pidgin.im
> Subject: Re: Pidign: 2.7.0 & SIPE Plug-in 1.10
>
> On Thu, May 13, 2010 at 10:18, Pento Robert-QA4508 <Rob.Pento at motorola.com> wrote:
>> I realize the SIPE Plug-in is not "sanctioned", but it seems not to be working for me.
>>        - I don't see the Account Type of "Office Communicator"
>>        - Does anyone else see this issue with the new Pidgin and the
>> new SIPE (1.10)
>>
>
> You probably need to reinstall SIPE after upgrading Pidgin.
>
> -D
>
> _______________________________________________
> Support at pidgin.im mailing list
> Want to unsubscribe?  Use this link:
> http://pidgin.im/cgi-bin/mailman/listinfo/support
> _______________________________________________
> Support at pidgin.im mailing list
> Want to unsubscribe?  Use this link:
> http://pidgin.im/cgi-bin/mailman/listinfo/support



-- 
Bill MacAllister, System Software Programmer
Infrastructure Delivery Group, Stanford University




More information about the Support mailing list